After my data is sent I can see it in the Diagnostic Window but nothing transfers to my computer.
Your device (Scanner, Scale, Etc) needs to have an End of Data Terminator. Typically this would be an
ASCII 13 [CR] at the end of the data line. This is required because incoming data can be variable in
length and wedge programs need to know when to send the data to your computer. Most devices are already
programmed this way but if required your hardware might need to be properly configured manually.
Incoming Data Example #1: 01234567890[CR]
Incoming Data Example #2: 1.26 LB[CR]